Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS, L76X – Durable Build, Easy to Use

Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS, L76X – Durable Build, Easy to Use.

Key Features:

• L76X Multi-GNSS HAT for Raspberry Pi, Supports GPS, BDS, QZSS
• Overview
• This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power...
• It is an easy way to enable global positioning function for your Raspberry Pi.
• Features
• Support Multi-GNSS systems: GPS, BDS, and QZSS
• EASY, self track prediction technology, help quick positioning
• AlwaysLocate, intelligent controller of periodic mode for power saving
• Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
• UART communication baudrate: 4800~115200bps (9600bps by default)
• Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
• 4x LEDs for indicating the module working status
• Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
• GNSS Specifications
• Band: GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)
• - Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch
• - C/A code
• - SBA: WAAS, EGNOS, MSAS, GAGAN
• Horizontal position accuracy:
• - Autonomous: <2.5mCEP
• Time-To-First-Fix @-130dBm (EASY? enabled):
• - Cold starts: <15s
• - Warm starts: <5s
• - Hot starts: <1s
• Sensitivity:
• - Acquisition: -148dBm
• - Tracking: -163dBm
• - Re-acquisition: -160dBm
• Dynamic performance:
• - Altitude (max): 18000m
• - Velocity (max): 515m/s
• - Acceleration (max): 4G
• General Specifications
• Communication interface: UART
• Baudrate: 4800~115200bps (9600bps by default)
• Update rate: 1Hz (default), 10Hz (max)
• Protocols: NMEA 0183, PMTK
• Power supply voltage: 5V / 3.3V
• Operating current: 13mA
• Operating temperature: -40 degree C ~ 85 degree C
• Dimensions: 65mm x 30.5mm
• Applications
• Vehicle tracking
• Asset tracking
• Security system
• Industrial PDA
• GIS application
• What is on Board
• L76B module
• CP2102: USB TO UART converter
• CAT24C32: EEPROM
• RT9193-33: Power manager
• Backup mode wakeup button
• Standby switch
• Indicators:
• - RXD/TXD: UART RX/TX indicator
• - PPS: GPS status indicator
• - PWR: Power indicator
• Raspberry Pi GPIO connector: For connecting with Raspberry Pi
• USB TO UART port
• GNSS antenna connector
• Battery holder: Support ML1220 rechargeable battery, for preserving ephemeris information and hot starts
• UART selection jumpers
• - A: control the L76B through USB TO UART
• - B: control the L76B through Raspberry Pi
• - C: access Raspberry Pi through USB TO UART
• Package Contents
• L76X GPS HAT x1
• GPS External Antenna (B) x1
• USB type A plug to micro plug cable x1
• RPi screws pack (2pcs) x1
• 2x20PIN pinheader x1

Package Info: Weight: 0.15kgs / 0.33lb, Size: 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch

Shipping: Shipping charges and final delivery dates are shown at checkout.