Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, GSM/GPRS/GNSS/Bluetooth HAT – Card Slot, Bluetooth

Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, GSM/GPRS/GNSS/Bluetooth HAT – Card Slot, Bluetooth.

Key Features:

• GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868
• Overview
• This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.
• It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.
• Features
• Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
• Support SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
• Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
• Bluetooth 3.0, supports data transferring through Bluetooth
• Onboard USB TO UART converter CP2102 for UART debugging
• 6x LEDs for indicating the module working status
• SIM card slot for 1.8V/3V SIM card
• RTC with backup battery holder
• Baudrate auto detection (1200bps ~115200bps)
• Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
• Support SIM application toolkit: GSM 11.14 Release 99
• Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
• GSM/GPRS
• Band
• - GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
• - Quad-band auto search
• - Compliant to GSM phase 2/2+
• Emitting power
• - Class 4 (2W @ GSM 850/EGSM 900 MHz)
• - Class 1 (1W @ DCS 1800/PCS 1900 MHz)
• GPRS connectivity
• - GPRS multi-slot class 12 (default)
• - GPRS multi-slot class 1~12 (configurable)
• GPRS data feature
• - Downlink speed: max 85.6kbps
• - Uplink speed: max 85.6kbps
• - Coding schemes: CS-1\CS-2\CS-3\CS-4
• - Support PAP (Password Authentication Protocol) for PPP connection
• - Support PBCCH
• - Support USSD
• SMS
• - Support: MT/MO/CB/Text/PDU mode
• - SMS storage: SIM card
• Audio
• - Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate
• - Support echo cancellation
• - Support noise reduction
• GNSS
• Receiver type
• - 33 tracking channels
• - 99 acquisition channels
• - GPS L1 C/A code
• Sensitivity
• - Tracking: -165 dBm
• - Cold starts: -148 dBm
• Time-To-First-Fix
• - Cold starts: 28s (typ.)
• - Hot starts: < 1s
• - Warm starts: 26s
• Accuracy
• - Horizontal position: <2.5m CEP
• Bluetooth
• Integrates AT commands
• Compliant to Bluetooth specification3.0 + EDR
• Support SPP, OPP, HFP/HSP, etc.
• Misc
• Operating voltage: 5V
• Operating temperature: -40 degree C ~ 85 degree C
• Storage temperature: -45 degree C ~ 90 degree C
• Dimensions: 30.2mm x 65mm
• What is on Board
• SIM868 module
• ZMM5V1: Regulator diode
• SMF05C: TVS diode
• CP2102: USB TO UART converter
• MP1482: Power chip
• NDC7002N: Voltage level translator
• GPS status indicator
• NET indicator:
• - Flashes fast when the module starts up
• - Flashes slowly after GSM register succeed
• STA module working status indicator
• SIM868 UART Tx/Rx indicator
• Power indicator
• SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
• 13 .Raspberry Pi GPIO connector
• SIM card slot
• USB TO UART interface
• 3.5mm earphone/mic jack
• GNSS antenna connector
• Bluetooth antenna connector
• GSM antenna connector
• CR1220 battery holder: for RTC backup battery
• UART selection switch
• - A: Control the SIM868 through USB TO UART
• - B: Control the SIM868 through Raspberry Pi
• - C: Access Raspberry Pi through USB TO UART
• Package Contents
• GSM/GPRS/GNSS HAT x1
• GSM Antenna x1
• GPS External Antenna (B) x1
• Bluetooth Antenna x1
• USB type A plug to micro plug cable x1
• RPi screws pack (2pcs) x1

Package Info: Weight: 0.19kgs / 0.41lb, Size: 14cm * 8cm * 3cm / 5.51inch * 3.15inch * 1.18inch

Shipping: Shipping charges and final delivery dates are shown at checkout.