CNBJ-620 Automobile Injector Tester, CNBJ-620 – TPU

CNBJ-620 Automobile Injector Tester, CNBJ-620 – TPU.

Key Features:

• About The Protuct
• This instrument can help you diagnose injector problems, and can test the fuel injectors one by one to help confirm the stuck, leaking or combustion...
• Operating Instructions
• Tumn off the engine of the car.
• Remove the wire plug with the fuel injector to be tested, and then connect the two pulse output terminals of the instrument with the fuel injector of the...
• Connect the red clip of the instrument to the positive pole of 12V automobile battery, and connect the black clip of the instrument to the negative pole of...
• Press "Mode set" key to select the required pulse signal output mode, and the screen will display the currently selected mode. The different models are...
• Mode "1": single pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out a pulse with a pulse width of about 255 Ms.
• Mode "2": short pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out 50 pulses with a pulse width of about 7Ms.
• Mode "3": long pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out100 pulses with a pulse width of about 3.5 Ms.
• Mode "4": continuous pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will continuously output pulses with a pulse rate of about 50...
• After selecting the required pulse signal output mode, press the "Pulse" key, the instrument will output pulse to the fuel injector to be tested, and the...
• After the test is completed, if it is necessary to repeat the test, press the "Pulse" key again; if you want to change the pulse mode, press the "Reset"...
• Warning
• The engine of the car must be turned off before using this instrument.
• Do not smoke or ignite near the car.
• Donot splash the fuel on the hot engine parts.
• Use this instrument only in ventilated places. Do not inhale the exhaust gas from the car and the steam generated by the fuel flying.
• Do not get close to the rotating (or moving) parts of any car, and do not touch the heating parts of any car.
• Do not short circuit the positive and negative electrodes of the automobile battery.
• Do not touch any auto parts with dangerous voltage
• Always follow the warnings, cautions and maintenance instructions in the vehicle maintenance manual.
• Wear qualified goggles.
• After the test, all disconnected vehicle connections should be restored correctly.
• Specifications
• 12V battery power supply
• Working conditions: 0-40 degree C; relative humidity less than and equal to 80%
• Storage conditions:-20C -50a??;relative humidity less than and equal to 85%

Package Info: Weight: 0.24kgs / 0.53lb, Size: 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch

Shipping: Shipping charges and final delivery dates are shown at checkout.