WCDMA 2100MHz Signal Booster / 3G Signal Repeater with Sucker Antenna, 2100MHz Signal Booster – Waterproof, Magnetic

WCDMA 2100MHz Signal Booster / 3G Signal Repeater with Sucker Antenna, 2100MHz Signal Booster – Waterproof, Magnetic.

Key Features:

• Why to use
• Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save life of somebody.
• Unfortunately, there are still some places where one can find themselves out of coverage. Usually those places are either too far from the cell phone base...
• 1) Parking lots, tunnels
• 2) Big stores, office buildings
• 3) Cars, boats etc.
• 4) House in remote areas etc
• Features
• High-gain linear power amplifier
• ALC and AGC function technology
• Ultra-low noise receive amplifier
• There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters
• Stable and reliable electromagnetic compatibility design.
• The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications
• With full-duplex communication mode.
• Dispel the heat effective reasonable, the structure is pretty, the volume is suitable
• How to work
• The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax).
• After the signal is accepted by the phone amplifier, the device amplifies it.
• Then this amplified signal goes through the connection cable (coax) to the inside antenna.
• And after that, the amplified signal transmits to the cell phone
• How to install
• Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
• Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
• Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
• Step 4: Mount your indoor antenna with signal repeater
• Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal
• Notes
• Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both...
• Indoor and outdoor antenna must be separated by wall
• Technique supports
• If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and...
• If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.
• If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a...
• Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area

Package Info: Weight: 1.00kgs / 2.20lb, Size: 51cm * 18cm * 13cm / 20.08inch * 7.09inch * 5.12inch

Shipping: Shipping charges and final delivery dates are shown at checkout.