Creator C502 V7.6 Car OBD2 Multi-system Scanner Car Diagnostic Tool for Mercedes-Benz before 2016, Creator C502 – Durable Build, Easy to Use

Creator C502 V7.6 Car OBD2 Multi-system Scanner Car Diagnostic Tool for Mercedes-Benz before 2016, Creator C502 – Durable Build, Easy to Use.

Key Features:

• Software Version: C502 V10.1
• Supports for the Mercedes-Benz models before 2016
• Include Chassis: 117, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210,211, 212, 215, 216, 217,...
• Note: 1. It does not support Mercedes-Benz cars before 2016 without OBD2 interface. 2. Does not support Smart and Sprinter models.
• Functions: Read codes, Erase codes, ECU information
• Creator C502 OBDII & EOBD Software Description:
• Easily determines the cause of the Check Engine Light ( MIL)
• Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3,and U1) codes
• Turns off Check Engine Light (MIL), clears codes and resets monitors
• Displays DTC definitions on unit screen
• Views freeze frame data
• Identifies pending codes
• Reads live PCM datastream
• Graph displays live PCM datastream
• Read I/M Readiness Status
• Displays live O2 sensor test data
• Performs modules present test
• Retrieves vehicle information (VIN, CIN and CVN)
• Supports CAN (Controller Area Network) and all other current OBD-II protocols
• Specifications:
• (1). Display: Color, 320 x 240 pixel display with contrast adjustment
• (2). Operation Temperature: - 20~75 degree Celsius
• (3). Storage Temperature: -40~120 degree Celsius
• (4). Power: 8V -- 24V
• A communication error occurs if the scan tool fails to communicate with the vehicle ECU (Engine Control Unit).
• You need to do the following to check up:
• (1). Verify that the ignition is ON;
• (2). Check if the scan tools OBD II connector is securely connected to the DLC of vehicle;
• (3). Verify that the vehicle is OBD2 compliant;
• (4). Turn the ignition off and wait for about 10 seconds. Turn the
• (5). Ignition back to on and continue the testing.
• (6). Verify the control module is not defective
• Scan tool does not power up
• If the scan tool won not power up or operates incorrectly in any other way, you need to do the following to check up:
• (1). Check if the scan tool OBD II connector is securely connected to the DLC of vehicle;
• (2). Check if the DLC pins are bent or broken. Clean the DLC pins if necessary.
• (3). Check vehicle battery to make sure it is still good with at least 8.0 volts.
• Package List:
• 1 x C502 Machine
• 1 x Manual

Package Info: Weight: 0.49kgs / 1.08lb, Size: 25cm * 15cm * 6cm / 9.84inch * 5.91inch * 2.36inch

Shipping: Shipping charges and final delivery dates are shown at checkout.